氧化铁纳米颗粒在磁共振成像中的应用

目前临床诊断中钆基造影剂的应用十分广泛,然而其对人体的毒性无法忽视,因此研究者致力于低毒性造影剂的研发。氧化铁纳米颗粒(Iron Oxide Nanoparticles,IONP)因其超顺磁性在磁共振成像(Magnetic Resonance Imaging,MRI)中具有良好的暗对比效果,并且具有良好的生物相容性。随着生物材料和分子影像技术的发展,IONP在MRI成像中的应用愈发广泛。近年来,IONP在多模态成像和诊断治疗一体化方面取得了进展。本文将以IONP的MRI成像机理、制备和表面修饰为基础,阐述近年来IONP在MRI成像应用的研究成果和问题,期望IONP取得更好的发展。     

西北太平洋表层沉积物地球化学特征及其物源指示意义

为深入了解西北太平洋表层沉积物地球化学特征及物质来源，对大洋40航次在西北太平洋马尔库斯-威克海山区采集的表层沉积物进行了全岩地球化学和黏土矿物测试分析。结果表明，研究区表层沉积物稀土元素（REE)平均质量分数为302.87×10^-6，北美页岩标准化稀土配分模式与黄土相似，并具Ce轻微负异常和Eu无异常特征。稀土配分模式、判别函数（discriminant functions,DF）、M/I（蒙脱石/伊利石）及涂片鉴定等结果指示沉积物物源具有多源性，主要为陆源风尘物质，并受海洋自生物质的强烈影响，海山玄武岩及其蚀变产物和硅质生物也有一定的贡献。研究区沉积物稀土特征既不同于边缘海沉积物，也有别于远洋沉积物，而与弧后盆地沉积物类似。结合1/δCe-LREE/HREE和LREE/HREE-Y/Ho判别图解结果，研究区沉积物物源结构属性应介于边缘海沉积物与远洋沉积物之间，为洋陆过渡区沉积。     

Predicting and researching adsorption configurations of pyridazine on Si(100) surface by means of X-ray spectroscopies in theory

The landscape of organic molecule on Si(100) surface has a great significance for organic functionalisation of Si semiconductor. Several possible adsorption configurations for pyridazine on Si(100) surface have been forecasted by systemic comparison and investigation. The C1s XPS and NEXAFS spectra of these adsorption systems based on density functional theory and full core-hole potential approximation have been calculated. Although the sensibility of XPS to these adsorption configurations is not very strong, these configurations can be absolutely distinguished by NEXAFS spectra, which will bring tremendous reference to the future experimental study. Mode II, III, V and VI have a significantly higher adsorption energy, which are most likely to be present in experiment. In addition, we have made the research on specific sources of the peaks in spectra by analysing their decomposed NEXAFS spectra, the results show that the Carbon atoms which do not bond to surface atoms, make the most contribute to the intensity of characteristic peaks in spectra.     

Na原子链表面等离激元特性的含时密度泛函研究

本文用含时密度泛函理论研究了线性Na原子链的表面等离激元机理.主要在原子尺度下模拟计算了体系随着原子数增加及原子间距变化的集体激发过程.研究发现线性原子链有一个普遍的特性——存在一个纵模和两个横模.两个横模一般在实验上很难被观测到.纵模随着原子链长度增加,能量红移的同时,该纵模主峰的强度呈线性增长.随着原子个数的增加,端点模式(TE)开始蓝移,能量和偶极强度都逐渐趋向饱和.横模能量被劈裂的原因概括如下:(一)每个位置的电子受到的势不同,在两端的电子受到的势要比在中间的电子受到的势要高,因此两端的电荷积累也比中间多;(二)端点存在悬挂键,所以中间的电子-电子间相互作用与端点的不一样,这两方面又都与原子间距d有关.     

Topological entropy of continuous self-maps on closed surfaces

The objective of this work is to present sufficient conditions for having positive topological entropy for continuous self-maps defined on a closed surface by using the action of this map on the homological groups of the closed surface.     

磁光平面波导的单向传播特性

表面磁等离子体(surfacemagnetoplasmons,SMPs)是一种在电介质和偏置磁场作用下磁光材料界面处传播的近场电磁波.其独特的非互易传播特性引起了大量科研工作的关注,但在具体的波导结构设计上仍存在很多问题.本文研究了一种银-硅-磁光材料的3层平面波导结构,SMPs在磁光材料和硅的界面处传播,发现在特定的频率范围内,SMPs的基模及高阶模式均具有正向或反向的单向传播特性.分别计算了旋磁与旋电材料平面波导的色散方程,研究了硅层厚度与外加磁场对能带结构及SMPs单向传播区域的影响,发现无论是旋磁或旋电材料的结构,硅层厚度的增加使高阶模式使高阶模式出现在更低的频率位置,使单向传输带宽变小甚至消失,外加磁场的变大使磁光材料的能带结构频率增大的同时带隙中也引入了高阶模式.计算了2种磁光材料平面波导的正向和反向的单向传播带宽宽度,发现旋磁材料YIG的单向SMPs模式出现在GHz波段,最大单向带宽可达到2.45 GHz;旋电材料InSb的单向SMPs模式出现在THz波段,最大单向带宽达到3.9 THz.     

FeCoCrCuNi高熵合金裂纹及孔洞结构力学与微观构象演化机理的分子动力学模拟研究

本文采用分子动力学方法研究了FeCoCrCuNi高熵合金裂纹及孔洞模型结构在不同轴向拉伸应变速率下的力学与微观结构演化机理. 结果表明：应变速率越高FeCoCrCuNi裂纹结构对应更高的过冲应变和过冲应力，其主要原因是高拉伸速率会导致高强度的BCC结构及孪晶结构的生成，而BCC结构及孪晶结构的产生进而会抑制应力的下降，通过应力-应变曲线，可知FeCoCrCuNi裂纹模型在轴向应力作用下表现为塑性形变. 对于不同尺寸的孔洞FeCoCrCuNi裂纹模型的应力模拟与结构分析，可以得出：孔洞尺寸越大, FeCoCrCuNi裂纹结构对应的过冲应变和过冲应力越小，其主要原因是大尺寸的孔洞造成孔洞之间产生裂纹的，进而会影响这个材料的屈服应变和屈服强度.     

介质材料二次电子发射特性对微波击穿的影响

以介质填充的平行板放电结构为例,本文主要研究了介质填充后微波低气压放电和微放电的物理过程.为了探究介质材料特性对微波低气压放电和微放电阈值的影响,本文采用自主研发的二次电子发射特性测量装置,测量了7种常见介质材料的二次电子发射系数和二次电子能谱.依据二次电子发射过程中介质表面正带电的稳定条件,计算了介质材料稳态表面电位与二次电子发射系数以及能谱参数的关系.在放电结构中引入与表面电位相应的等效直流电场后,依据电子扩散模型和微放电中电子谐振条件,分别探讨了介质表面稳态表面电位的大小对微波低气压放电和微放电阈值的影响.结果表明,介质材料的二次电子发射系数以及能谱参数越大,介质材料的稳态表面电位也越大,对应的微波低气压放电和微放电阈值也越大.所得结论对于填充介质的选择有一定的理论指导价值.     

Competitive Metal Coordination of Hexaaminotriphenylene on Cu(111) by Intrinsic Copper Versus Extrinsic Nickel Adatoms

The interplay between the self-assembly and surface chemistry of 2,3,6,7,10,11-hexaaminotriphenylene (HATP) on Cu(111) was complementarily studied by high-resolution scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS) under ultra-high vacuum conditions. To shed light on the competitive metal coordination, comparative experiments were carried out on pristine and nickel-covered Cu(111). Directly after room-temperature deposition of HATP onto pristine Cu(111), self-assembled aggregates were observed by STM, and XPS results indicated still protonated amino groups. Annealing up to 200 °C activated the progressive single deprotonation of all amino groups as indicated by chemical shifts of both the N 1s and C 1s core levels in the XP spectra. This enabled the formation of topologically diverse π–d conjugated coordination networks with intrinsic copper adatoms. The basic motif of these networks was a metal–organic trimer, in which three HATP molecules were coordinated by Cu₃ clusters, as corroborated by the accompanying density functional theory (DFT) simulations. Additional deposition of more reactive nickel atoms resulted in both chemical and structural changes with deprotonation and formation of bis(diimino)–Ni bonded networks already at room temperature. Even though fused hexagonal metal-coordinated pores were observed, extended honeycomb networks remained elusive, as tentatively explained by the restricted reversibility of these metal–organic bonds.